en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Chaincase

Never leave ‘used’ lubricant in the chaincase during the storage season. Doing so may leave water present in the chaincase which may cause corrosion and rust.

  1. Follow the Owner’s Manual procedures and drain / fill the chaincase with new Polaris SCL (Synthetic Chaincase Lubricant). All Polaris PRO-RIDE, AXYS, and MATRYX snowmobile feature ‘fill-to-spill’ lubricant fill specifications which makes it relatively ‘easy’ to re-fill the chaincase.

  2. Rotate the driven clutch in the direction of forward vehicle travel to move the chain slack to the tensioner-side of the drive system. Lock the parking brake.

  3. Loosen the drive chain adjuster lock nut. Turn the adjuster screw inwards until it can no longer be turned by hand.

  4. At this point, turn the adjuster nut ¼ turn counter clockwise.

  5. Tighten and then torque the jam nut to the specification listed in the Owner’s Manual. Release the parking brake.

    NOTICE
    If the snowmobile is equipped with a transmission (Titan / WideTrak snowmobiles), there is not a drive chain adjustment procedure.
Parent topic: Summer Storage Guide