en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Pin Activated Security System (if equipped)

NOTICE
The P.A.S.S. feature must be activated by your dealer using Polaris Digital Wrench. See your dealer for setup and activation.

The Pin Activated Security System (P.A.S.S.) allows you to safely lock and unlock your vehicle from the Ride Command display screen.

Enable P.A.S.S.

  1. Go the settings menu by pressing the Polaris button followed by the All Settings button.

  2. Select Vehicle Settings from the left toolbar.

  3. Select Passcode Unlock.

  4. If this your first time activating P.A.S.S. you will be prompted to enter a new pin. Enter and verify new pin.

  5. Turn off the vehicle using the key ignition switch.

NOTICE
After activating P.A.S.S. for the first time you must power down the vehicle and allow the ECM fully shutdown before restarting. This may take up to three minutes.

Disable P.A.S.S.

  1. Go the settings menu by pressing the Polaris button.

  2. Select Vehicle Settings from the left toolbar.

  3. Select Passcode Unlock.

  4. Enter pin code to disable P.A.S.S.