Front Suspension (IFS) Shock Settings

Always perform shock spring preload adjustments with the weight of the vehicle removed from the shock and with the shock at full extension.

To reset IFS clickers, rotate the clicker to full stiff, and then back off the same number of clicks for each shock.

ATP® Monotube

MODEL	Matryx Nordic Pro	Matryx Voyageur
FACTORY INSTALLED LENGTH	10.14 in (25.75 cm)	10.14 in (25.75 cm)
MINIMUM INSTALLED LENGTH	9.8 in (24.89 cm)	9.8 in (24.89 cm)
FACTORY CLICKER SETTING*	No clicker	No clicker

Walker Evans® Velocity

MODEL	Matryx INDY VR1	Matryx Switchback Assault
FACTORY INSTALLED LENGTH	10.75 in (27.3 cm)	9.75 in (24.8 cm)
MINIMUM INSTALLED LENGTH	9.75 in (24.8 cm)	8.75 in (22.2 cm)
FACTORY CLICKER SETTING*	5	6
* From Full Stiff

Walker Evans® Velocity Hi/Lo

INDY XCR models are equipped with Walker Evans Velocity shocks, which utilize dual shock clickers to control bottoming and ride comfort. To reset shock clickers, rotate the clicker to full stiff, and then back off the same number of clicks for each shock.

NOTICE

Speed refers to the rate of shock compression, not speed of vehicle.

The outside clicker 1 adjusts shock compression during high speed compression events. Turn clicker clockwise to increase compression and counterclockwise to decrease compression.
The inside clicker 2 adjusts shock compression during low speed compression events. Turn clicker clockwise to increase compression and counterclockwise to decrease compression.

MODEL	Matryx INDY XCR
FACTORY INSTALLED LENGTH	9.75 in (24.76 cm)
MINIMUM INSTALLED LENGTH	8.85 in (22.48 cm)
FACTORY CLICKER SETTING*	Outside Clicker: 5 Inside Clicker: 6
* From Full Stiff

FOX® QS3

MODEL	INDY Adventure	INDY XC	Switchback XC
FACTORY INSTALLED LENGTH	10.8 in (27.44 cm)	10.8 in (27.44 cm)	10.3 in (26.17 cm)
MINIMUM INSTALLED LENGTH	10 in (25.5 cm)	10 in (25.5 cm)	9.8 in (24.87 cm)
FACTORY CLICKER SETTING*	Medium	Medium	Medium
* From Full Stiff