en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Heated Grips

The heated handlebar grips can be operated using the left hand controls. To customize the temperature of the grips, follow the procedure below.

Activate Heated Grips

To activate the SmartWarmer system in the handlebars, press the Heated Grips button 1 on the left hand controls. There are four heat levels to choose from:

  • Low

  • Medium

  • High

  • Off

Set Grip Temperature

The temperature of each heat level can be customized using your gauge or hand controls. Use the following procedure to adjust the temperature of your heated hand grips.

  1. Start the engine.

  2. Press and hold the center button to enter the Options Menu.

  3. Press and release the MODE button until HEATERS is displayed in the information display area.

Using the Gauge Buttons

  1. Press and release the MODE button to select which SmartWarmer element to customize: grips or thumb. Press the SET button to select.

  2. Press and release the MODE button to choose a heat level: low, medium, or high. Press the SET button to select.

  3. Use the SET and MODE buttons to increase/decrease the temperature to desired setting.

    • MODE decreases the temperature.

    • SET increases the temperature.

  4. Press the Polaris button to lock in temperature.

  5. Press the MODE button to advance to the next heat setting.

  6. Repeat steps 3-5 for each setting: low, medium, and high.

  7. Press the Polaris button to exit.

  8. Press and release the SET or Polaris button to exit. The grips will adjust to the temperatures of the new settings when the hand grip warmers are enabled.

Using the Left Hand Controls

  1. Press and release the Select button 2 to select which SmartWarmer element to customize: grips or thumb. Press the Select button to select.

  2. Press and release the Down Arrow 4 to choose a heat level: low, medium, or high. Press the Select button to select.

  1. Use the Up arrow and Down arrows to increase/decrease the temperature to desired setting.

    • UP increases 3 the temperature.

    • DOWN arrow 4 decreases the temperature.

  2. Press the Select button to lock in temperature.

  3. Press the Down arrow to advance to the next heat setting.

  4. Repeat steps 3-5 for each setting: low, medium, and high.

  5. Press the Select button to exit.

  6. Press the SET or Polaris button on the gauge to exit. The grips will adjust to the temperatures of the new settings when the hand grip warmers are enabled.