Weight Transfer During Acceleration
The preferred method for controlling weight transfer during acceleration is by adjusting the rear rear scissor stop (RRSS). The factory setting is the best for most trail riding conditions.
To decrease weight transfer under acceleration (for improved cornering), rotate the RRSS to a higher position.
To increase weight transfer or ski lift during acceleration, rotate the RRSS to a lower position.
NOTICE
When adjusting for weight transfer, both the left
and right rear rear scissor stop adjuster blocks must be adjusted
to the same position.
1 High
2 Medium
3 Low
4 Low
TIP
Your dealer can help you with initial setup and additional
setup instructions to help you achieve your optimum ride. A scissor
stop tool is also available from your dealer.