Oil Change (Pump Method)
This procedure requires the use of a commercially available hand pump oil extractor.
-
Elevate the front of the snowmobile using a floor jack or appropriate lift.
-
Remove the fill plug 1. Clean all metal shavings off the plug.
-
Insert the tube of a hand pump oil extractor into the fill hole. Direct the hose toward the bottom front area of the cover, away from the chain/sprocket.
-
Extract the oil from the chaincase.
-
Lower the snowmobile.
-
Using a funnel, slowly add the recommended oil until the fluid begins to overflow.
-
Clean the area with a clean, dry shop towel.
-
Reinstall the fill plug and torque to specification.
Chaincase Oil
10.5 oz (310 ml)
Fill Plug
4-4.9 ft-lbs (5.4-6.6 N·m)