en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Skag Replacement

WARNING

Worn skis and/or skags will adversely affect handling. Loss of vehicle control may result, causing serious injury or death. See your authorized POLARIS dealer's studding chart for recommended skags. If you install longer or more aggressive carbide skags than the original equipment, it may also be necessary to add track studs to maintain proper vehicle control while turning on hard-packed snow or ice.

NOTICE

Always replace ski skags in pairs.

To replace ski skags, do the following:

  1. Raise and support the front of the snowmobile so the skis are approximately 6 inches (15.2 cm) from the ground.

  2. Remove the attaching nuts 1 and pry the skag downward.

  3. Reverse the steps to install a skag. Tighten nuts to specification.

TORQUE

Ski Skag Nuts

7 ft-lbs (10 N·m)

Parent topic: Ski Skags