en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

First Time Use of Your Security System

Perform all tasks in the order shown if you wish to activate and use the optional security system.

TASK 1: Activate the security system

See your authorized POLARIS dealer to have the optional security system feature activated in the electronic control unit (ECU).

TASK 2: Lock the System the First Time

NOTICE
To lock the system for the first time, use code 000.

  1. Press and hold the center button on the instrument cluster to enter the Options Menu.

  2. Press and release the MODE button until SECURITY OFF appears in the information display area.

  3. Press and release the SET button.

    ENTER CODE will appear in the information display area.

  4. Press and release the SET button to increase the 1st digit.

  5. Press and hold the SET button to accept the 1st digit and advance to the 2nd digit.

  6. Press and release the SET button to increase the 2nd digit.

  7. Press and hold the SET button to accept the 2nd digit and advance to the 3rd digit.

  8. Press and hold the SET button to accept the 3rd digit and submit code.

    If code is correct, SECURITY ON will appear in the information display area. The system is now locked. Proceed immediately to Task 3.

    If code is incorrect, BAD CODE will appear in the information display area. Return to step 3 to re-enter code.

TASK 3: Unlock the System

NOTICE
To unlock the system for the first time, use code 000.

  1. While the engine is running, Press and release the SET button.

    ENTER CO will appear in the information display area.

  2. Press and release the SET button to increase the 1st digit.

  3. Press and hold the SET button to accept the 1st digit and advance to the 2nd digit.

  4. Press and release the SET button to increase the 2nd digit.

  5. Press and hold the SET button to accept the 2nd digit and advance to the 3rd digit.

  6. Press and release the SET button to increase the 3rd digit.

  7. Press and hold the SET button to accept the 3rd digit and submit code.

    If code is correct, SECURITY OFF will appear in the information display area

    NOTICE
    The system is now unlocked.

    If code is incorrect, BAD CODE will appear in the information display area. Return to step 1 to re-enter code.

  8. You must now enter a new security code. Proceed immediately to TASK 4.

TASK 4: Enter Your New Security Code

  1. Immediately after locking and unlocking the system, and while SECURE OFF is displayed, simultaneously press and hold the MODE and SET buttons.

    SET NEW CODE will appear on the information display area.

  2. Press and release the SET button to increase the 1st digit.

  3. Press and hold the SET button to accept the 1st digit and advance to the 2nd digit.

  4. Press and release the SET button to increase the 2nd digit.

  5. Press and hold the SET button to accept the 2nd digit and advance to the 3rd digit.

  6. Press and release the SET button to increase the 3rd digit.

  7. Press and hold the SET button to accept the 3rd digit.

    CODE SET will appear in the information display area, and then the new code will blink three times in the information display area

    NOTICE
    Your new code is now set. The system is NOT locked.

  8. Record your new security code in a safe place for future reference.

Record your new personal security code here: __________________

TIP
If you lose your personal security code, see your authorized POLARIS dealer to have the code reset to “000”. Then perform TASK 2 through TASK 4 to change the code to one of your own choosing.
Parent topic: Security System (Ignition Lock System)