en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Rider Information Center

The rider information center is located in the instrument cluster. The center displays vehicle speed, engine speed, odometer, trip meters (2), total engine hours of operation, fuel level, engine temperature, and a diagnostic display mode.

Setting changes must be made with the engine running or with the vehicle powered by an external DC power supply connector. The information center is set to display standard units of measurement for distance and temperature.

1 Information Display Area - Displays engine speed or vehicle speed (whichever is not displayed in the speed display), engine temperature and maximum vehicle speed.

2 Speed Display - Displays vehicle speed or engine speed.

3 Fuel Gauge - The segments of the fuel gauge show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. All segments including the fuel icon will flash. Refuel immediately.

TIP
If the fuel icon fails to display, an open or short circuit has occurred in the fuel sensor circuit. See your authorized POLARIS dealer.

4 Odometer/Engine Hour Display - This area displays the odometer, Trip A, Trip B and engine hours.

In this section:

  1. Information Display Area
  2. Speed Display Area
  3. Fuel Gauge
  4. Odometer/Engine Hour Display Area
  5. Playback Function
  6. Standard/Metric Display
Parent topic: Standard Instrument Cluster