en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Diagnostic Display Mode

The diagnostic display mode is for informational purposes only. Your authorized POLARIS dealer can perform all major repairs.

The diagnostic mode is accessible only when the check engine warning indicator is illuminated and a diagnostic code is active.

Do not stop the engine if you want to view the active code (failure code). Active codes cannot be retrieved if power is interrupted to the instrument cluster. The codes will become inactive codes if power is interrupted. Inactive codes are stored in the history of the unit. Please see your authorized POLARIS dealer can help retrieve inactive codes.

Use the following procedure to view active codes.

  1. Do not stop the engine.

  2. Press and hold the center button on the instrument cluster to enter the Options Menu.

  3. Press and release the MODE button until DIAGCODE appears in the information display area. The Diagnostic display mode will appear in the Options Menu if there is an active trouble code.

    TIP

    When the diagnostic mode is displayed, the check engine warning indicator will begin to flash.

  4. A set of two numbers will appear in the display.

    • The 2-6 digit suspect parameter number (SPN) in the information display area indicates which component is generating the fault code.

    • The 1-2 digit failure mode indicator (FMI) number in the odometer area indicates the fault mode, such as open or short circuit.

  5. More than one fault may be active. Press and hold the SET button or SET switch for two seconds to toggle to the next active code. Repeat until all codes are retrieved.

  6. See Diagnostic Trouble Codes for code definitions and failure descriptions.

Parent topic: Standard Instrument Cluster