en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Group Ride Setup

There are two ways to set up a group ride.

  • Mobile Phone

  • Vehicle-to-Vehicle Antenna

Mobile Phone Group Ride

Features of using your mobile phone for group riding:

  • Works within cellular range

  • Requires a tethered mobile phone

  • Infinite range between vehicles

  • Works with friends using the mobile app

To set up a group ride using a mobile phone, do the following:

  1. Enable your Bluetooth® tethering in your phone's settings. Tap instruction for more information of how to enable tethering on an iPhone® or Android® phone.

  2. Connect your phone via Bluetooth®. If you phone is currently connected you MUST disconnect and reconnect it.

  3. Press the login button to login to your Ride Command account. If you do not have a ride command account, sign up at ridecommand.polaris.com

    NOTICE
    Once you've completed all three steps above, your information will be stored (unless cleared manually) and you will not need to login again into your Ride Command account for future group rides.

  4. Press the back button to go back to the group ride screen and join your Group Ride.

NOTICE
In order for mobile phone users to join a V2V ride group, at least one group member must be connected via both the V2V antenna and a mobile phone.

Vehicle to Vehicle (V2V) Antenna

Features of using the Vehicle-to-Vehicle antenna for group riding:

  • Works anywhere, no phone required

  • Requires an installed V2V antenna, standard on vehicles equipped with a 7S display

  • 1+ miles range between vehicles

Use the following procedure to setup a V2V Group Ride:

  1. From the map menu, tap the Group Ride button.

  2. Tap Setup V2V Group Ride button on the display screen.

  3. Tap the Antenna Installed toggle switch to the Yes position.

Parent topic: Group Ride