Lubrication Guide
Check and lubricate all components at the intervals outlined in the Polaris Maintenance Schedule. Items not listed in the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no additional lubrication will be needed.
| Item | Recommended Lubricant | Capacity at Fluid Change | Fill Plug Torque | Drain Plug Torque | See Page |
|---|---|---|---|---|---|
|
Engine Oil |
Polaris PS-4 5W-50 4-Cycle Engine Oil |
2 qt (1.9 l) |
— |
13 ft-lbs (18 N·m) |
|
|
Transmission Fluid |
Polaris AGL Gearcase Lubricant & Transmission Fluid |
32 oz (948 ml) |
12 ft-lbs (16 N·m) |
12 ft-lbs (16 N·m) |
|
|
Front Gearcase Fluid |
Polaris Demand Drive Fluid |
9 oz (265 ml) |
19 ft-lbs (26 N·m) |
19 ft-lbs (26 N·m) |
|
|
Rear Gearcase Fluid |
Polaris Angle Drive Fluid |
5 oz (150 ml) |
12 ft-lbs (16 N·m) |
12 ft-lbs (16 N·m) |
|
|
Brake Fluid |
Polaris DOT 4 Brake Fluid |
— | — | — | |
|
Front Prop Shaft |
Polaris U-Joint Grease |
Grease fittings (3 pumps maximum) every 500 miles (800 km), before long periods of storage, or after pressure washing or submerging. | |||