Handlebars
The handlebars can be adjusted for rider preference.
WARNING
Improper adjustment of the handlebars or incorrect
torquing of the adjuster block tightening bolts can cause limited
steering or loosening of the handlebars, resulting in loss of control
and serious injury or death. Follow the adjustment procedures exactly,
or see your authorized dealer for service.
-
Remove the upper headlight pod (if equipped).
-
Loosen the four handlebar bolts 1 and adjust the handlebar to the desired height.
-
Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right.
-
Torque the front two bolts to 14-17 Nm, then torque the rear two bolts. A gap of up to 3 mm will remain at the rear of the clamp blocks.