en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Frequently Asked Questions

  1. How do I know whether my software is up-to-date?

    From the Badge Panel menu, select All Settings. Navigate to the General Settings tab. Press Update Software.

  2. How do I update my display software?

    • If your software is out-of-date, log in to your Ride Command account at ridecommand.polaris.com to download the latest software data. For detailed instructions for updating display software, see USB Drive.

    • If your display is Wi-Fi capable your software will automatically update once the display is successfully connected to a network and logged into your Ride Command account. See Connecting Devices Using Wi-Fi (if equipped).

  3. Why can’t my display acquire a satellite signal?

    The GPS may take several minutes to lock on signal if the vehicle has been sitting cold. Let the system warm up for a few moments before troubleshooting.

    If less than 4 satellites are appearing on the GPS satellite screen, drive the vehicle to an area free of overhead obstructions.

  4. My phone is Bluetooth®-enabled. How do I connect it to my Ride Command display?

    Depending on the brand or model of phone, there are varying processes to connect to Bluetooth® on the display. See Connecting Devices Using Bluetooth® for detailed instruction on pairing your mobile device. For specific Bluetooth® functionality related to your smartphone, refer to your device’s user manual.

  5. How do I adjust the screen brightness on my display?

    Tap the Badge Panel icon at the top of the display screen. Adjust the slider to the desired brightness.

  6. How do I set the clock?

    There are several options for managing time on your Ride Command display. Press the Time tab of the Settings menu to get started.

    Option 1: Set the time zone (GMT offset) and daylight savings mode to your region. correct for your location. GPS automatically sets the clock when there is a locked GPS signal.

    Option 2: Tap the Badge Panel icon at the top of the display screen. Press the All Settings button then select Time from the menu on the left toolbar.