Headlamp Bulb Replacement (CANADA)
When servicing a halogen lamp (bulb), avoid touching the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch a lamp, clean it with denatured alcohol.
-
Pull the sealing boot away from the back of the bulbs and housing.
-
Press the looped end of the wire bulb retainer clip and swing the end toward the center of the bulb to release it from the latch tab.
-
With the wire connector attached, pull the bulb out.
-
Disconnect the wire harness. Install the new bulb and secure the retainer.
-
Reinstall the sealing boot. Make sure it seals tightly around the bulb base and lens to seal off from moisture.