Constant Power Fuse
Models equipped with electric start
have a battery/electric start wire harness. The 2 amp constant power
fuse 1 is located in the electric start wiring harness.
This fuse protects KEY ON power at the ignition
switch. KEY ON power supplies battery voltage to the PIDD and GPS
puck.
![](/owner/owners-manuals/0000543429.png)
If the PIDD does not turn on when the key is in the ON position, check for a blown fuse. If the fuse is blown, inspect the constant power circuit. Repair or replace any damaged components before replacing the fuse.