en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

IFS Shock Adjustments

Always perform shock spring preload adjustments with the weight of the vehicle removed from the shock and with the shock at full extension.

Factory Preload Settings

IMPORTANT
The factory installed length of the IFS Shock Spring is equal to the maximum installed free length.


MONOTUBE


VELOCITY

FACTORY SPRING

FACTORY INSTALLED LENGTH

MINIMUM INSTALLED LENGTH

PRO RMK Monotube

10.25 in (26 cm)

9.5 in (24.13 cm)

PRO RMK (Velocity)

10.25 in (26 cm)

10 in (25.4 cm)

RMK KHAOS Lightweight Spring

10.34 in (26.26 cm)

10 in (25.4 cm)

RMK KHAOS Standard Spring

10.25 in (26 cm)

9.78 in (24.8 cm)

Factory Clicker Settings (if equipped)

RMK KHAOS models come factory-equipped with Walker Evans Racing Velocity shocks. Velocity shocks utilize dual shock clickers to control bottoming and ride comfort. To reset IFS clickers, rotate the clicker to full stiff, and then back off the same number of clicks for each shock. PRO RMK models equipped with Velocity shocks do not have dual shock clickers.

NOTICE
Speed refers to the rate of shock compression, not speed of vehicle.
  • The outside clicker 1 adjusts shock compression during high speed compression events. Turn clicker clockwise to increase compression and counterclockwise to decrease compression.

  • The inside clicker 2 adjusts shock compression during low speed compression events. Turn clicker clockwise to increase compression and counterclockwise to decrease compression.


RMK KHAOS


PRO RMK

Model

Clicker Setting

(from full stiff)

PRO RMK (Velocity)

6

RMK KHAOS

High-Speed: 4

Low-Speed: 6