en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Ignition Switch

The ignition switch has three positions: OFF, RUN, and START.

  • 1 OFF Vehicle / Display power off

  • 2 RUN Vehicle / Display power on

  • 3 START Activates starter motor (if equipped)


If equipped with electric start, turn the key to START to crank the engine. When released, the key automatically returns to the RUN position.

NOTICE

If the key remains in the RUN position after using the engine stop switch to stop the engine, the 7S Display will remain active. The screen will turn off after several minutes of inactivity, but if a battery is installed, the display will continue to draw a small amount of current from the battery until the key is turned off. This feature is useful for accessing Ride Command without starting the engine, but turn the key off when the display is not in use.

The 7S Display is not dependent on a battery while the engine is running. This allows the 7S to remain fully powered and retain GPS lock during a successful PERC event (forward/reverse transition). When the engine is shut off, the display will immediately power down.

For vehicles equipped with a battery, the 7S Display will remain fully powered (battery installed) for 60 seconds when the key remains in the RUN position after Engine Stop Switch is depressed. The display will power off automatically after 10 minutes of inactivity.