QUICKDRIVE
The QUICKDRIVE drive system utilizes a drive belt that exhibits extraordinary performance and service life when the belt is handled properly before and during installation. Improper handling of this belt can result in a shortened service life.
Inspect and change the belt at the intervals outlined in the Maintenance chapter.
Special tools are required to remove and install the QUICKDRIVE belt. Your authorized POLARIS dealer can assist with this service.
Belt Handling
-
Store a new belt in original packaging. Remove only when ready for installation.
-
Avoid belt contact with solvents, oils or chemical cleaners.
-
Do not crimp or bend the belt to a diameter less than the upper sprocket.
-
Do not back-bend the belt.
-
Do not twist or flip the belt.
-
Do not use a pry bar or screwdriver to remove or install the belt.
-
Always break in a new belt properly. See Drive Belt Break-In for belt break-in procedures.