en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Front Fork / Suspension Inspection

  1. Place the motorcycle on the sidestand and inspect the front forks. If fork oil is present on the outer fork tube 1, do not ride the motorcycle. See your dealer for service before operating. If fork oil is present around the fork seal 2 or inner fork tube 3, replace the fork seal.

  2. Clean the inner fork tubes to remove bugs, tar or buildup which may cause seal wear or leakage. Inspect the outer surfaces of the inner fork tubes for scratches or damage from foreign objects.

  3. Straddle the motorcycle and bring it to the fully upright position. Apply the front brake and push downward (hard) on the handlebars several times. The front suspension should operate smoothly and quietly.

  4. Fork oil condition and level affects front suspension performance and internal component wear. Replace fork oil at the intervals specified in the Periodic Maintenance Table on Periodic Maintenance Table. Special tools are required to perform this procedure. See the INDIAN MOTORCYCLE Service Manual or an authorized INDIAN MOTORCYCLE dealer or other qualified dealer.