Indicator Lamps

High Beam

The headlight switch is set to high beam. This indicator will flash if there is a problem with the low or high beam light.

Low Battery Voltage

This lamp illuminates when battery voltage is low. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See Battery Charging Rate Low or Battery Discharges. This lamp also illuminates with the security light and/or power switch when the key fob battery is low.

Security

The security indicator illuminates when the security system is activated.

ABS Not Activated

The indicator remains on until the anti-lock system activates, which occurs when vehicle speed exceeds 6 MPH (10 km/h). When the lamp is illuminated, the anti-lock brakes will not activate, but the conventional brake system will continue to operate normally.

Cruise Control Status

Amber Lamp: Cruise control is enabled, but not set. When flashing, a cruise control related fault exists. Green Lamp: Cruise control is set to the desired speed. Read the safety and operation procedures before using cruise control. See Using Cruise Control.

Low Fuel

This lamp illuminates when approximately one gallon (3.8 liters) of fuel remains in the fuel tank. The LCD Display will switch into a Low Fuel Mileage Counter Mode to provide the rider with mileage tracking from the time the indicator was activated.

Neutral

The transmission is in neutral and the power switch is ON.

Check Engine

This lamp illuminates briefly when the power switch is turned ON. This indicates proper function. If this lamp illuminates while the engine is running, see an authorized dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists. Retrieve the error codes for diagnosis.

Chassis Fault

The alert symbol illuminates if a chassis fault occurs.

Sidestand Light

The sidestand light will turn on anytime the sidestand is down.