Priming the Fuel System
If the motorcycle runs out of fuel, prime the fuel system before attempting to restart the engine.
-
Fill the fuel tank.
-
Turn the ignition key to the ON position or power on the motorcycle by pushing the power switch.
-
Move the engine stop / run / start switch to the RUN position.
-
Allow the fuel pump to run until it stops (about 2 seconds).
-
Move the engine stop / run / start switch to the STOP position.
-
Turn the ignition key to the OFF position or power off the motorcycle by pushing the power switch.
-
Repeat steps 2–6 four to five times.
-
Start the engine.