en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Removal / Installation (2-Up Models)

NOTICE

When removing the seat, use caution to avoid contact with the fuel tank.

When reinstalling the seat, use caution when you align the seat base grommets to the seat mount darts, to avoid damage to the grommets.

  1. Grasp the rear of the passenger seat and pull up to disengage the rear grommet 1 from the rear dart.

  2. Grasp the front of the passenger seat and pull up to disengage the middle grommet 2 from the middle dart.

  3. Grasp the front of the driver seat and pull up to disengage the front grommet 3 from the front dart.

  4. Rotate the seat and slide the seat out of the passenger hand hold strap. The passenger hand hold strap remains attached to the vehicle.

  5. To reinstall the seat, make sure the seat base engages the rear dart, then press down firmly on the front of the driver seat to engage the front dart to the grommet. Lastly, press down firmly on the front of the passenger seat to engage the middle dart to the grommet.

WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the dart. Make sure the grommet is fully engaged to the dart before operating.