en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Jump Starting the Vehicle

  1. Make sure both vehicles are off.

  2. Remove the seat and locate the negative (-) terminal and positive (+) jump start terminal cover.

  3. Attach the red jumper cable clamp to the positive (+) jump start terminal of the dead battery.

  4. Attach the other red jumper cable clamp to the positive side of the working battery.

  5. Attach the other black jumper cable to the negative side of the working battery.

  6. Attach the black jumper cable clamp to a ground location on the vehicle with the dead battery.

  7. With all of the cables connected, start the motorcycle with the working battery. Let the motorcycle idle for one minute, and then attempt to start the motorcycle with the dead battery.

  8. Disconnect the cables in the opposite order as they were installed.

  9. Replace the positive (+) jump start terminal cover.